Skip to main content
HAM + COMMERCIAL

Pass your FCC radio exam

4,291 official FCC pool questions, commercial and ham. GMDSS, GROL and Radar to Technician, General and Extra.

What's in the app

Everything you need. Nothing you don’t.

Commercial and ham pools, every official figure, on every device. Study anywhere, then get on the air.

No signal needed

Study offline

Field Day, on the tower, or up a summit for SOTA.

Study
New
Previous
  • Type: StudyFCC Element 2 - Technician Class (Amateur)Last Opened Yesterday63%22/35 AnsweredCorrect: 19 | Incorrect: 3Resume
  • Type: StudyFCC Element 3 - General RadiotelephoneLast Opened Oct 2318%9/50 AnsweredCorrect: 7 | Incorrect: 2Resume
  • Type: StudyFCC Element 2 - Technician Class (Amateur)Last Opened Oct 1860%12/20 AnsweredCorrect: 11 | Incorrect: 1Resume

What type of session would you like to start?

Specific CategoriesCreate a custom session by selecting specific categories of questions to study.
Shuffled QuestionsCreates a new study session from a random selection of questions.
Smart StudyCreates a new study session using questions from your weakest performing categories.
Bookmarked QuestionsReview the questions you bookmarked while studying.
DashboardStudyTestSearchResources
Official pool figures

Every figure, built in

All 43 official pool figures, right in the question.

Correct!

Answer B

B (±600 kHz) is correct: the standard 2-meter repeater offset in the Technician pool is plus or minus 600 kHz.


Key facts

• 2 m repeaters use a 600 kHz split between input and output.

• ±5 MHz is the common 70 cm offset, not 2 m.

• ±500 kHz and ±1 MHz are not standard 2 m repeater splits in the FCC amateur pools.

• Programming example: output 146.94 MHz → input 146.34 MHz (minus 600 kHz).


Solution

Read the band: 2-meter repeaters → think 600 kHz, not megahertz-scale offsets.

Match the pool answer: Plus or minus 600 kHz → choice B.

Confirm with figure T-1: the repeater listens on one frequency and re-transmits 600 kHz away.


Why the other choices are wrong

A (±5 MHz): That is the usual 70 cm repeater offset, not 2 m.

C (±500 kHz): Not the published 2 m standard offset.

D (±1 MHz): Also not the standard 2 m repeater split.

Repeater offsets

On 2 meters, repeaters almost always use a ±600 kHz split: your radio listens on the repeater output and transmits on an input frequency 600 kHz away.


Nudge

5 MHz offsets belong to the 70 cm band, not 2 m. Compare each choice to 600 kHz before you pick.


Before you answer

If the repeater output is 146.94 MHz, the input is typically 146.34 MHz (minus 600 kHz). Figure T-1 shows the same split.

Question bank

Search every pool

Find any question by keyword, GMDSS to Extra.

Smart dashboard

Find your weak spots

Track scores by exam and topic.

Today's plan

0 / 45
T2 — Operating Procedures45 min focus session · weakest topics in this moduleDaily goal: 45 min
Start today's session
Printable

Print practice tests

Any exam, answer key included.

Every device, in sync

Natively built for every major platform

Ready when you are.

Create a free account and study every question, with your progress synced to every device.

Industry expert? Learn about our Partner Program